• 设为首页
  • 加入收藏
联系我们
联系人:南经理
手机:13932899771
电话/传真:0318-8832626
邮箱:706843811@qq.com
地址:河北省冀州市西王工业区
当前位置:首页 >>新闻中心 >> 螺杆式启闭机在操作过程中应注意的事项
螺杆式启闭机在操作过程中应注意的事项: Matters needing attention in the operation of screw hoist: 首先,要检查电源和备有电源。螺杆式启闭机工作是需要三相电的。在工作前首先要确保的是电压的稳定以及三相电的充足。电源指示上启闭的运行状态是否与电源指示一致。 First, check the power supply and the power supply. The work of screw type hoist is three phase electricity. Before working, the first thing to ensure is the stability of voltage and the adequacy of three-phase power. The operation state of the opening and closing of the power indicator is consistent with that of the power supply. 其次,在螺杆式启闭机运行过程中要要确保启闭机和闸门的配合程度,当闸门处于开启状态时,禁止动制动设备和固定螺丝。 Secondly, in the running process of screw type hoist, it is necessary to ensure the degree of cooperation between the opening and closing machine and the gate. When the gate is in the open state, the brake equipment and the fixed screw are prohibited. 当螺杆式启闭机超过一定的高度时候要将润滑部位的螺丝拧紧,防止出现故障。若在中途发生故障,要马上停止工作,待电源关闭后进行检查。 When the screw hoist exceeds a certain height, it is necessary to tighten the screws in the lubrication parts so as to prevent any malfunctions. If there is any trouble on the way, stop working immediately and check after the power is off.
网站建设及优化:保定遨游公司 版权所有 © 河北省衡水市顺益水工机械厂
联系人:南经理 手机:13932899771 电话/传真:0318-8832626 邮箱:706843811@qq.com 地址:河北省冀州市西王工业区
水利机械推荐:启闭机、螺杆启闭机,卷扬启闭机、启闭机闸门、铸铁闸门、钢制闸门、清污机、拦污栅、橡胶止水等 网址:www.qibiji58.com
友链:光纤激光切割机 抹灰机 螺杆启闭机 过电压保护器 隔离墩模具 蠕动泵 启闭机 电缆挂钩 铸铁闸门 精密铸造 光纤激光切割机 造型机 网站建设及优化:保定遨游公司