• 设为首页
  • 加入收藏
联系我们
联系人:南经理
手机:13932899771 15612833218
电话/传真:0318-8830218
邮箱:706843811@qq.com
地址:河北省冀州市西王工业区
当前位置:首页 >>新闻中心 >> 橡胶止水带标准及安装注意事项
中埋式橡胶止水带应用范围 Application range of medium buried rubber water stop belt 地下构筑物、水坝、贮水池、游泳池、屋面以及其他建筑物质和构筑物的变形缝防水中使用.本产品主要用于混凝土现浇时设在施工缝及变形缝内,与混凝土结构成为一体的基础工程、地下设施、隧道 涵洞、输水渡槽、挡水坝等,确保工程建设的使用寿命. Underground structures, dams, tanks, pools, swimming pools, roofs and other building materials and structures are used in water and water protection. This product is mainly used in the construction joints and deformation joints, and the foundation engineering, underground facilities, tunnel culverts, water aqueducts, dams and so on, when concrete is cast in place. To ensure the service life of the construction. 外贴式橡胶止水带 External adhesive rubber water stop belt 钢边止水带橡胶止水带的安装 Installation of rubber sealing belt with steel edge water stop belt 在施工中,在混凝土浇注过程式中把橡胶止水带部分或全部浇埋在混凝土中,如果混凝土中有许多尖角的石子和锐利的钢筋头,由于橡胶的撕裂强度比拉伸强低3-5倍,因此一旦被刺破或撕裂时,不需很大外外力裂口就会扩大,所以在止水带定位和混凝土浇捣过程中,应注意定位方法和浇捣压力,以免止水带被刺破,影响止水带的防水效果,300mm止水带,8mm止水带最常用的具体注意事项如下: In the construction, the rubber sealing belt is partially or completely buried in concrete in the concrete pouring process. If there are many sharp corner stones and sharp reinforcing steel head in the concrete, the tear strength of the rubber is 3-5 times as strong as stretching, so when it is pierced or torn, it will expand without a large external force crack. In the process of water belt positioning and concrete pouring, the positioning method and pouring pressure should be paid attention to in order to prevent the water belt from being pierced. The waterproof effect of the water stop belt should be affected. The most commonly used attention to the 300mm water stop belt and the 8mm water stop belt are as follows: 焊接橡胶止水带 Welded rubber sealing belt A、橡胶止水带不能长时间露天曝晒,防止雨淋,勿与污染性强的化学物质接触.产品应存放场所最好保持-10℃-+30℃,相对湿度在40%-80%. A, rubber sealing belt can not be exposed to open air for long time, prevent rain and do not contact with chemicals with strong pollution. The product should keep the best storage place at -10 - + 30, and the relative humidity is 40% - 80%. B、在产品的运输和施工中,防止机械,钢筋损伤.成品存放和运输中应取直平放,勿加重压. B, in the transportation and construction of products, prevent mechanical and steel damage. The finished products should be placed vertically and horizontally in storage and transportation. C、在施工过程中,产品安装必须固定,避免在浇注混凝土时发生位移,保证止水带在混凝土中的正确位置. C, during the construction process, the product installation must be fixed to avoid displacement when pouring concrete, so as to ensure the correct position of the water stop belt in the concrete. D、通常我们固定止水带的方法有:利用附加钢筋固定;专用卡具固定;铅丝和模板固定等,如需穿孔时,只能选在止水带的边缘安装区,不得损伤其它部分. D, the usual methods for fixing the water stop are: fixing the attached steel bar, fixing the special fixture, fixing the lead wire and formwork, and so on. In case of perforation, it can only be selected in the edge installation area of the water stop belt and no other parts should be damaged.
关键字:橡胶止水带
版权所有 © 河北省衡水市顺益水工机械厂
联系人:南经理 手机:13932899771 15612833218 电话/传真:0318-8830218 邮箱:706843811@qq.com 地址:河北省冀州市西王工业区
水利机械推荐:启闭机、螺杆启闭机,卷扬启闭机、启闭机闸门、铸铁闸门、钢制闸门、清污机、拦污栅、橡胶止水等 网址:www.qibiji58.com
友链:光纤激光切割机 抹灰机 螺杆启闭机 过电压保护器 隔离墩模具 蠕动泵 启闭机 电缆挂钩 铸铁闸门 精密铸造 光纤激光切割机 造型机 网站建设及优化:保定遨游公司