• 设为首页
  • 加入收藏
联系我们
联系人:南经理
手机:13932899771 15612833218
电话/传真:0318-8830218
邮箱:706843811@qq.com
地址:河北省冀州市西王工业区
当前位置:首页 >>新闻中心 >> 造型机的紧实方法
1,由于机构中有弹筑垫或气垫缓冲,对地丛的雇动较小。 2,可以实现微艇及压展及不同紧实方法组合,有高大模样也能得到很好的紧实,紧实度分布比较均匀。 3,工作展动频率相对于瓜击实砂为高,因而其造型机的生产率比展击造型机高。 虽然由于微脆压实造型机有以上的优点。但微震实砂时。产生的振动和噪声仍然很大,且微展机构的结构复杂,因而被其他新型造型机,如气冲造型机,射压造型机所取替。 1, because there are building pads or cushion cushions in the mechanism, the employment of the ground cluster is relatively small. 2, it can realize the combination of micro boat and pressing and different compaction methods, and the high profile can also be well compacted, and the distribution of tightness is more uniform. 3, the working frequency is higher than that of melon, so the productivity of the molding machine is higher than that of the impact molding machine. Although the micro brittle compaction molding machine has the above advantages. But when the sand is sands. The vibration and noise are still very large, and the structure of the micro spreading mechanism is complex, so it is replaced by other new molding machines, such as air stamping machine and ejection molding machine.
版权所有 © 河北省衡水市顺益水工机械厂
联系人:南经理 手机:13932899771 15612833218 电话/传真:0318-8830218 邮箱:706843811@qq.com 地址:河北省冀州市西王工业区
水利机械推荐:启闭机、螺杆启闭机,卷扬启闭机、启闭机闸门、铸铁闸门、钢制闸门、清污机、拦污栅、橡胶止水等 网址:www.qibiji58.com
友链:光纤激光切割机 抹灰机 螺杆启闭机 过电压保护器 隔离墩模具 蠕动泵 启闭机 电缆挂钩 铸铁闸门 精密铸造 光纤激光切割机 造型机 网站建设及优化:保定遨游公司