• 设为首页
  • 加入收藏
联系我们
联系人:南经理
手机:13932899771 15612833218
电话/传真:0318-8830218
邮箱:706843811@qq.com
地址:河北省冀州市西王工业区
当前位置:首页 >>新闻中心 >> 钢闸门常用的防侵蚀办法钢闸门

 和钢木构造闸门的金属局部,应按期进行防锈、防腐处置。钢闸门常用的防侵蚀办法有涂料维护和金属喷镀维护两种。防护处置以前,都必需仔细做好外表除锈,常用的办法有人工铲敲、用钢丝刷、喷砂除锈等。要求除尽旧漆和铁锈、锈斑、油污、尘土和酸碱、盐的剩余物,然后用松喷鼻水或松节油刷洗一次,使其悉数显露灰白色的金属本性,而且坚持枯燥,有必然的粗拙度,最终涂料要有必然的稀释剂使其到达适合的稠度,以利施工操作。普通终年配套的稀释剂。防锈涂料稀释剂掺加量不宜过多,普通以不超越涂料重的2%~3%为宜。 The metal parts of the steel gate and the steel wood structure gate should be antirust and antiseptic on schedule. Two kinds of corrosion prevention methods commonly used for steel gate are coating maintenance and metal spraying maintenance. Before the protection and disposal, the surface rust removal must be carefully done. The commonly used methods are manual shovel, steel wire brush, sand blasting and rust removing. In addition to the requirements of the remainder as the old paint and rust, rust, grease, dust, salt and alkali, and then use loose perfume or turpentine scrub once, making it all exposed metal nature of white ash, and keep dry, have certain roughness, the final coating should have the necessary dilution agent arrive for consistency, to facilitate the construction operation. A common perennial diluent. The addition amount of the antirust paint thinner should not be too much, which is suitable for 2% to 3% of the weight of the coating.

关键字:闸门 钢闸门
版权所有 © 河北省衡水市顺益水工机械厂
联系人:南经理 手机:13932899771 15612833218 电话/传真:0318-8830218 邮箱:706843811@qq.com 地址:河北省冀州市西王工业区
水利机械推荐:启闭机、螺杆启闭机,卷扬启闭机、启闭机闸门、铸铁闸门、钢制闸门、清污机、拦污栅、橡胶止水等 网址:www.qibiji58.com
友链:光纤激光切割机 抹灰机 螺杆启闭机 过电压保护器 隔离墩模具 蠕动泵 启闭机 电缆挂钩 铸铁闸门 精密铸造 光纤激光切割机 造型机 网站建设及优化:保定遨游公司